This is a simulator to demonstrate how processors execute assembler instructions.
The processor is not an actually existing one, but it has the (nice) features fromall kinds of processors.
All data is supposed to be of the same size (16 or 32 bits integer or even floating point(!),whatever you like).
The instructions aren't really coded in binary and all take one memory location.
Every instruction has at most two arguments and data flows from the right to the left argument.
The following instructions are currently recognized:
The processor handles the compares like a RISC processorso 'ge r,r' means: r becomes r>=r.and it's then usually followed by a jpf (jump if false) or jpt (jump if true)based on the value of the register with the result (r in this case).This way no flag register is required, which makes designing the pipe-lineof a RISC computer much easier.
Press on the example buttons to have example code filled in...
Some more notes:
The call/return mechanism works like in a RISC processorwhich means that the return address is not being pushed on the stack,but is saved in a register (in this case called 'ret').The return from subroutine instruction just moves the return valueback to the ip (instruction pointer) register.In fact the 'ret' pseudo instruction is translated by the assembler into 'mov ip,ret'.If the subroutine is going to call one or more other subroutines, the return value canbe saved in the same way as the other registers are being saved by the compiler.In a lot of RISC processors all registers can be used to store the return address in.But that would complicate things unnessarily in this simulator.
Of course the push and pop instructions wouldn't be present in a real RISC processorsince they need complicated and therefore time consuming pre-decrement and post incrementoperations.In a RISC processor the stack pointer (sp) is decreased at the start of a subroutine,to provide enough space for saving registers (including the call return address),creating local variables, temporary calculation fields and arguments to subroutines.All this data is then accessed via the sp. This way a frame pointer (fp) isn't even needed.
Most RISC processors have 32 registers and as much as possible data is kept in themduring the life of each function.